Product Information
About this item
- Protect objects from being damaged by a closing gate
- Operating Temperatures - 20°C to +60° C
- Sensing distance up to 50 feet
- LED indicator for ease in alignment
- When the safety beam is broken the gate stops and reverses
Product Description
The Sentry Photo Eye is a secondary safety device. It produces a beam between the 2 units. When the beam is broken it will keep the gate from closing. It requires wires to be connected to both units (20 gauge) for operation. Typically a swing gate needs two sets of photo eyes for the best area protection. One set of photo eyes pointing across the drive on the outside of the hinge post (A). The second set mounted across the drive at the point where the gate is fully opened (B). The photo eye must be installed where the gate does not break the beam. The primary unit (Receiver) should be installed close to the control box. The two units must face each other to establish the beam (maximum distance 50 feet). 1 year warranty covers defects in material and workmanship. From the Manufacturer The Sentry Photo Eye is a secondary safety device. It produces a beam between the 2 units. When the beam is broken it will keep the gate from closing. It requires wires to be connected to both units (20 gauge) for operation. Typically a swing gate needs two sets of photo eyes for the best area protection. One set of photo eyes pointing across the drive on the outside of the hinge post (A). The second set mounted across the drive at the point where the gate is fully opened (B). The photo eye must be installed where the gate does not break the beam. The primary unit (Receiver) should be installed close to the control box. The two units must face each other to establish the beam (maximum distance 50 feet).
