Thermal Laminating Pouches ID/Luggage Tag 10 Mil 2.5” x 4.25” +Slot 500/pk

Product Description

Oregon Lamination Heat Activated Laminating Pouches Luggage Tag size 2-1/2" x 4-1/4" x 10 mil 2 sides (64mm x 108mm x 250 microns thick x 2 sides) with slot hole one LONG side for an attachment device which must be purchased separately. Laminate is high clarity after adhesive is heat activated. The clear glossy finish protects and enhances colors. These laminates are 10 mil thick on each flap for major durability, strength, rigidity and protection. ALERT: Many pouch laminators on the market can seal a maximum of only 5 mil pouches, so PLEASE make sure your laminator is capable of sealing 10 mil pouches prior to ordering. (If you don’t have your machine’s manual, a good reference is if your laminator has either a speed control OR a temperature control, it will likely seal 10 mil pouches). Oregon Lamination is among industry leaders in providing the quality laminating supplies for a reasonable price. Our laminating products provide high value protection using quality materials. This product has heat activated adhesive compatible in all thermal pouch laminators capable of sealing 10 mil 2-1/2” x 4-1/4” laminating pouches. FEATURES:Waterproof and Resists Penetration by Chemicals, Greases, and Oils High glossy finish brightens colors dramatically Small Pre-rounded Corners for a Smooth Professional Finish approximately 1/8” radius (3mm) Metric Pouch size: 64mm x 108mm 250 microns thick (x 2 sides = 500 microns total thickness added to your sheet) Recommended insert sheet size Maximum: 1-15/16" x 4" (49mm x 102mm) to provide a minimum standard 1/8” (3mm) sealed border protecting your card’s edges while avoiding the pre-slotted hole area (if desired) Made of 2 Durable 10 mil polyester plastic sides including heat activated adhesive (20 mil total encapsulating and waterproofing your sheet) which becomes clear when heat and even pressure is applied (laminator recommended)Note: Industry standard specification for 10 mil laminating pouches is 10 mil on each flap for a total of 20 mil added to your paper card. 1 mil equals 1/1000th of an inch (metric: 25 microns). The industry calls these pouches; however, are sealed on only one edge instead of three (more like a file folder than a pouch, but with a 3/32” flat folded spine). TYPICAL APPLICATIONS:Luggage Tags Trade Show Gifts (laminating business cards into luggage tags) I.D. Cards Badges Proximity Cards Band Passes Machinery & Parts TagsLaminating Tips:When trying ANY for the 1st time, consider running at a slightly lower temperature (or faster speed). If the results are cloudy, you can always run the sheet again at a higher temperature or slower speed, but you cannot fix heat blisters caused by running too hot. If you plan on trimming or punching sheets, wait 24 to 72 hours for adequate adhesive curing time and a professional cut edge. All laminating pouches are not the same. Oregon Lamination laminating pouches have not been setting on the shelf for years. This means fresh adhesive may melt faster than expected, which means potential faster running times or slightly lower temperatures might be used. Oregon Lamination laminating supplies are manufactured to stringent specifications designated by actual users of the product to achieve high clarity with minimum defects. Note: Thank you for considering Oregon Lamination laminating products, designed by people who do laminating for a living and provide a performance guarantee.