MB-11 Marble Polishing Powder with Microfiber Cloth and Gloves - Spot Polish Water Stains, Rings or Etches to Restore Marble, Travertine, Limestone or Onyx

$44.90

★ 4.0552 reviews

Product Information

ASINB07QL3HKSF

CategoryTools & Home Improvement

MerchantDeFusco Industrial Supply

About this item

WORKS ON CALCITE-BASED STONES - MB-11 is designed to remove etches, water stains, or water rings on countertops made of marble, travertine, limestone, and onyx, and works best for light colored stones.
NO TOOLS REQUIRED - This unique combination of specialty abrasives and catalysts makes the art of marble polishing extremely easy to implement without the need of any power tools!
COMPLETE ETCH REMOVER KIT - The 8 ounce polishing kit comes with a 16 x 16 inch microfiber cloth, a pair of disposable latex gloves, and our proprietary blend of MB-11 marble polishing powder; everything you need to restore your stone’s original gloss.
PERFECT FOR THE DIY-ER - MB-11 is perfect for the Do-It-Yourselfer or small projects at home when you need to remove etches or any water stains out of your calcite-based stone. All you need to do is add some water and hand buff it with a terry cloth.
DIRECTIONS - First test MB-11 polishing powder on an inconspicuous area. Use gloves and apply 1/8 teaspoon of powder to any dull spot to be restored. Use a spray bottle to spray water over the powder to make a wet paste. Use cloth and rub until area is dry. To eliminate any residue, spray stone cleaner and rub dry.

Product Description

MB-11 Marble Polishing Powder Marble polishing powder is designed for spot polishing of most water stains or rings from polished marble, Travertine and any other calcite-based stone.16x16 Microfiber Cloth For Marble Stone Microfiber lifts and holds dirt, grease, grime, liquids and bacteria. These fibers include both positive-charged polyester fibers and negative-charged nylon fibers essential for buffing your marble countertop back to its original gloss. Essential for Marble.$8.99 Value1 Pair of Latex Gloves Use gloves at all times when handling MB-11 Marble polishing powder.Directions for Use Be certain to test inconspicuous area for extra caution before use. Apply approximately 1/8 teaspoon of powder to the dull spot to be restored. The mixture should be a wet paste consistency. Using slightly moistened microfiber cloth, rub until the area treated is dry. Rub in circles (with a little pressure) Then use a fast back and forth motion (with more pressure) until the stone surface is dry and shiny. This will make for a perfect blend. Repeat the process if needed.