4" Ultimate Handwheel Fits 1/2" Shaft or Smaller - Table Saw, Lathe & More

Product Information

About this item

• This 4 inch (100mm) hand wheel is compression-molded from tough phenolic (bakelite) around a solid AL6061 aluminum core hub, so the crank handle spins true and holds its shape under the heat and pressure a busy table saw hand wheel or lathe handwheel takes near a motor housing, rated to 400F (200C) without softening, warping or cracking the way an ordinary ABS handwheel does after a season of regular cranking on shop machinery, indoors or out in a garage workshop.
• Three set screws triangulate around the hub of this crank wheel to lock the 1/2 inch (12.7mm) pre-machined bore onto a round, D-shaped or square shaft, so the wheel handle grips tight with zero slipping, rattling or backlash even under high-torque cranking on a drill press crank, milling vise crank or lathe tailstock handwheel, and the aluminum hub can be re-drilled larger if your shaft calls for a custom bore beyond the stock 1/2 inch size.
• The revolving handle on this table saw crank handle is a PA6 nylon grip that threads into a brass insert set in the wheel rim, so this rotating handle turns smoothly hour after hour without stripping the way a riveted plastic knob does, and it stays field-replaceable years down the road if the swivel knob itself ever wears from constant crank handle use on a drill press quill, band saw tension wheel or surface grinder crank.
• Use this universal crank handle wheel as a direct table saw handle replacement for fence and blade-height adjustment, a lathe hand wheel for tailstock feed, a milling vise crank, a drill press crank handle for quill feed, or a band saw and surface grinder crank, and it also suits bending, slotting, rotary table and cross-slide work on both vintage and modern shop machinery once the shaft diameter and bore size are matched to your machine.
• Check your shaft before ordering: this DONGYANG ultimate handwheel measures 4 inch (100mm) across with a pre-machined 1/2 inch (12.7mm) bore, and the aluminum hub can be bored out larger for a custom shaft if your machine needs a different diameter than the stock bore. Measure your shaft and compare it against your old handle before ordering to confirm this hand wheel crank matches your table saw, lathe or milling machine. Made in Korea by DONGYANG.