Product Information
Availability
In Stock
Seller
Quaerion
About this item
- Electric foam cutting tool - Suitable for low density and softer foam boards, such as low density Styrofoam, Pearl Cotton, EPS, Sponge, EPP, KT Board, Cellullar Glass. It is not suitable for high density Styrofoam, Pearl Cotton, EPS, Sponge, EPP, KT Board, Cellullar Glass. Density and tight foam boards, such as XPS, extruded boards, plastic boards, etc.
- Clean and precise cuts - The high-quality stainless steel used in the construction of this foam cutter ensures clean and precise cuts every time. It seals the edges of the foam as it cuts, leaving no debris behind, making it perfect for intricate and small print designs in advertising, hobbyist artwork creation, foam carving, and art making. You can cut the foam boards from any angle and craft them into your desired shape. Different lengths of wand can cut various thicknesses of foam boards.
- Good heating speed - Made of high quality stainless metal. With a 18W power output, the 5cm and 11cm cutting tool can reach 160℃ in just 5 seconds. After 20 seconds, the maximum temperature of the 11cm foam cutter can reach 350℃ , while the maximum temperature of the 5cm wand can reach 280℃ . The bow hot wire is stable at 200℃. After hot wire cutter is fully heated, the foam should be cut smoothly and quickly, and the cutter should not be left in the same position on the foam for a long time.
- Product usage - Hot knife foam cutter suitable for cutting pearl cotton, KT board, EPS, sponge, EPP, cellular glass etc,. You can cut foam from any angle and craft your own masterpiece, at the same time it is also perfect for commercial artwork development, complex and small font design in advertisement (such as letters), art piece creation by hobbyist, foam carving, DIY craft projects in home & school. Note: Only suitable for small-scale foam cutting projects.
- Maintenance suggestion - 1. Pay attention to ventilation in work and product heat dissipation. Turn off the power and take a break after continuous work for more than 30 minutes.(If working for more than 15 minutes during hot summer days, take a break.) 2. After it cools down, please wipe the heating needle with a damp sponge to avoid blackening and hardening caused by adhesion Of oxides. 3. Before use, make sure power adapter is tightly plugged into socket, and the green power light is on.
