Plastic pipe welding tool，Plastic welder kit Contains welding heads of 6 diameters，Water Pipe Welding Machine Electric Heating Hot Melt Tools for PPR PE Tube 1000W 220V

Product Description

Instructions ：1. Install the radiator on the fixed welding equipment, put the welding equipment on the rack, install the corresponding heating mold according to the required pipe specifications, and tighten it with a wrench, usually at the front end.2. Turn on: Turn on (note that the power supply must be equipped with a grounding protection wire), the green indicator light is on, until the green indicator light is off, and the red indicator light is on, indicating that the fuse enters the automatic temperature control state, and you can start to operate. Note: In the automatic temperature control state, the red light and the green light will light up alternately, indicating that the fuse is in a controlled state and does not affect operation. 3. Welded pipe: The pipe cutter cuts the pipe with a straight pipe. The pipe and the pipe enter the fuse mold without rotating at the same time, and operate according to the requirements of the table. After the heating time is reached, the pipe and the pipe are taken out of the mold at the same time, quickly and Directly enter the required uniform depth without rotation, so that the seam opening becomes uniform. Name: Smart Pipe Welding Machine Kit Material: Aluminum + Metal Power: 800W/1000W Voltage: 220V Heating plate size: 800W: 16*6.5CM; 1000W: 17.8* 8CM Heating speed: 1 minute Heating temperature: 0~320℃/ 32~608℉ Ambient temperature -20~50℃/ -4~122℉ Relative humidity: 45% to 95% Temperature control: digital temperature control