Argon Pulse Spot Welder, Portable Laser Welding Machine, Compact Jewelry Tools, 400W/50A, 220V (220V)

$2,107.56

Product Information

ASINB0B7S6M2R9

CategoryTools & Home Improvement

Merchantbaixiangxianyaqianshangmaoyouxiangongsi

AvailabilityIn Stock

About this item

Suitable for precious metal alloys; gold, silver, platinum, palladium, titanium, stainless steel, etc.
Repair metal joints or breaks without removing set stones or pearls, repair heat sensitive metals or metal alloys, repair surface or entry point of a molding of the same alloy, with the inert argon atmosphere, welding can be done without requiring fluxing. The soldering point is smooth and does not require scaling or scale removal.
Precisely position parts by tacking with the spot welder, welding of necklaces with a diameter 0.3 mm or larger (smaller diameter may melt).
With some limitations, aluminum, tin and most brass alloys, alloys with different attributes that are incompatible in normal welding.
Alloys that would oxidize during welding and thus require an inert (argon) atmosphere.

Product Description

Specifications: Power supply: 220V/110V, 50/60Hz. Power: 400 W. Ampere for welding: 0.5~50A, Continuous adiustable (fluctuation). Weight: 7 kg. Size: 250 x 400 x 190 mm. Installation and testing: 1. Connecting electrode, black wire to black connection (ground/cathode), red wire to red connection (positive /anode). 2. Connect argon gas through the argon gas pressure reducing valve; adjust the gas pressure reading to the minimum. 3. Tungsten needle can be sharpened by grinding on the grinding wheel, or with the use of a Fordham flex shaft or dremal tool and an abrasive disk. 4. When installing the tungsten needle, please insure that the needle is approximately 5 mm out of the welding head. The diameter of the needle should be 0.1 mm. Operation steps: 1. Plug the device into the wall socket and turn it on. 2. Adjust input current by adjusting the current regulating dial to 1-1.5 to start. The current regulating dial ranges from 1-8. 3. Check that gas is flowing over the tungsten tip with your finger. Adjust Argon gas until you can just feel the flow. 4. Clamp the object to be welded with the negative ground electrode. 5. Insure you have arc welding eye protection in place. 6. Briefly step on the foot pedal and release. The arc will have pulsed and spot welded at the point you had the tungsten electrode.