ANYCUBIC ABS-Like Resin Pro 2, Upgraded 8K 3D Printer Resin with Enhanced Strength and Toughness, High Precision, Low Odor, Wide Compatibility for All LCD 3D Printers (Clear, 1kg)

Product Information

About this item

• 【Enhanced Strength and Toughness Beyond ABS Resin】 Based on the excellent tensile and bending strength of the previous version of ABS-like resin +, ABS-Like Resin Pro 2 strengthens the toughness performance, increases the elongation at break by more than 100%, and the finished model is stronger, which can be used to print high-strength and high-toughness models such as structural parts, industrial prototype parts, and fixtures.
• 【High Flowability, High Success Rate】 Low viscosity and high flowability result in shorter curing times and easier model formation. Anycubic ABS Pro 2 3D Printer Resin also facilitates rapid reflow, minimizing delamination during printing. Additionally, Anycubic ABS Pro 2 Printing Resin offers improved backplane adhesion, significantly reducing the risk of printing failures.
• 【High Precision with Minimal Shrinkage】 With an even lower shrinkage rate, the likelihood of distortion is reduced, allowing you to achieve top-notch precision and display sharp, vivid details in your prints.
• 【Low-odor and Worry-free Printing】 Anycubic R&D team developed the resin to a lower odor formula which reduces discomfort for those sensitive to smells, creating a more comfortable printing environment.
• 【High Compatibility, Enhanced Protection】 Anycubic ABS Pro 2 Resin is compatible with a wide range of LCD and DLP 3D printers operating within the 365-405nm wavelength, our resin offers seamless integration with most printers on the market. The safety packaging with leak-proof design and multiple protective measures ensure worry-free handling, eliminating concerns of damage or leakage.
• User Instructions: 1) Before use, shake the resin thoroughly, clean the resin vat and build plate, ensure the vat's bottom remains highly transparent, and inspect the release film for any signs of damage. 2) During use: Open the cap, remove the sealing film, pour the resin into the vat and ensure it does not exceed the max fill line. 3) After use: Use proper tools for post-processing, including scrapers, flush cutters, tweezers, gloves, and IPA (≥95% concentration) 4) Post-processing: A, Remove the prints from the build plate using a scraper. B, Wash prints, remove the support, and cure the prints. C, Polish, paint, etc.
• Attention: 1)Store at room temp, avoid sunlight. 2) Print above 20°C (lower = poor success; higher = more color settlement). 3) Stir vat sediment or shake in bottle. 4) Uncured resin = light-sensitive; print dark/ventilated or keep cover closed. 5) Do not soak uncured prints in cleaner (harms performance)