MOCREO WiFi Freezer Alarm Refrigerator Thermometer, App & Email Alerts

About this item

• CATCH A FAILING FREEZER BEFORE THE FOOD IS GONE - A garage or chest freezer almost always fails when no one is watching, and by the time you open the door a side of beef or a whole season of game meat is already lost, so NS1 sends an instant app and email alert the moment the temperature starts to climb - in a deep freezer, the kitchen fridge, a freezer full of breast milk, the mini fridge where you keep medication, a cabin you reach twice a month or a walk-in cooler at work.
• THE ALERT REACHES YOU EVEN WHEN YOUR PHONE IS SILENT - An alarm you sleep through is no alarm at all, so NS1 raises it three ways at once: a push notification in the app, an email, and the screen itself flashing red, with iOS Critical Alerts that come through even when the phone is on silent - and current units also beep on the device. You set the alarm delay yourself, so a few seconds of door-opening never turns into a false alarm.
• STILL ALERTS WHEN THE POWER GOES OUT - Power can cut two ways: the freezer's own circuit trips while NS1 keeps running, or the whole house goes dark and takes the WiFi with it. Either way the app raises an alert - a rising-temperature alarm in the first case, an offline alert in the second - so you can call a neighbour before a full freezer thaws. When power returns NS1 rejoins your WiFi on its own.
• TRUST THE NUMBER, EVEN IN A DEEP FREEZE - A reading you can't trust is worse than none, so NS1 holds ±0.9°F accuracy across a wide -40°F to 257°F range and stays dependable at deep-freeze temperatures; and if you already keep a thermometer in that freezer, you can fine-tune NS1 in the app until the two agree, letting you set your alarm with confidence instead of guessing whether the food is really safe.
• A PROBE THAT WON'T HOLD YOUR DOOR OPEN - A thick sensor cable props the door open just enough to leak cold, build frost and wear out the seal, so NS1 runs a 4.9 ft ultra-thin flat probe that slips right through the fridge or freezer gasket - thin enough to route into a reptile enclosure or a wine cooler as well - and the guide shows where to place it in a large freezer, away from the very top where defrost cycles swing the reading.
• NO EXTRA BOX TO BUY OR KEEP ALIVE - Many smart freezer monitors make you buy a separate hub and keep it powered and online, which is one more cost and one more thing that can fail, so NS1 connects straight to your 2.4GHz home WiFi with no hub or gateway at all; it joins 2.4GHz networks only, so give a garage or basement unit a router or extender within reach.
• PLUGGED IN, SO IT NEVER GOES QUIET ON A DEAD BATTERY - NS1 runs on continuous USB-C power and needs a wall outlet within reach of the 4.9 ft cable; a USB power adapter is not in the box, as most homes already have a spare one in a drawer. What you get in return is a monitor with no battery to watch and nothing to recharge, plus up to 2 years of history you can export to CSV for free - enough to watch your compressor cycling on and off.