← Back to Store

BTF-LIGHTING FCOB COB LED Strip 14W/m 16.4FT DC24V Warm White 3000K CRI 90+ 10mm Width Dimmable LED Ribbon for Indoor Decoration, Mini Touch Dimmer Switch Max3A Silver(No Adapter)

Product Information

ASINB0D9LRTB1V
CategoryTools & Home Improvement

About this item

  • 【Ultra Bright and Uniform】DC24V 528LEDs/m 16.4FT Warm White 3000K FCOB COB LED Strip. Flip Chip On Board LED strip(FCOB).Adopting high brightness LED as the light source to ensure the brightness while maintaining color consistency.Compared with traditional 5050SMD 3528SMD light strips, FCOB COB LED strip dense light-emitting units create a brighter, softer, spotless and more uniform light, avoiding black in the middle area. CRI 90+
  • 【Shopping With Confidence】COB LED lights of single color series is more energy efficient.Adopting real double-layer copper PCB board, better electronic conductivity and heat dissipation.More than 65,000 hours lifespan.We also provide 24/7 customer service.For troubleshooting and replacement, or any questions about purchase or installation, please feel free to contact us.
  • Easy to Install:Plug play with led strips; Indoor use only. Use come with adhesive tape to fix it to a clean, flat surface. Notes: 1. Please don't stick on the place with metal. 2. Please don't put it on hand to control the LED. Touch Turn on/off : Short Touch the controller , can turn on/off the light. The default maximum brightness when turning on the lights is 100%.
  • Adjusting brightness: When long pressing any position of the dimming controller, the brightness of the PWM FCOB single color LED strip will change from 10% to 100%. Keeping touch it again, LED strip will going to dim gradually. When dimming, you can stop touching when the needed brightness is reached so that you can get the desired brightness.
  • Note: 1. Please do not wire backwards, otherwise the mini dimmer switch controller will overheat and short-circuit. 2. The mini dimmer switch controller voltage depends on PWM FCOB single color LED strip . For example, If use DC12V PWM FCOB single color LED Strip , you should use the DC24V3A 72W power supply to power it.

Similar Items