Product Code: B0DB1X7MZD
100HP1632A Turntable Lock Compatible with Audio Technica, Replacement for AT-LP120 Turntables Tonearm Lock Clamp, to Prevent The Tonearm from Moving
$13.99
Product Information
Seller
Bodyontheocean
About this item
- 【Applicable models】100HP1632A turntable lock, replacement for Audio Technica AT-LP120 turntables tonearm lock clamp
- 【High-Quality Materials】AT-LP120 turntable lock made of high-quality plastic, have good insulation and waterproof properties
- 【Installation Guidance】When installing the turntable lock clamp, riser the clip is attached to has a tiny screw that you have to remove (don’t lose it), carefully turn that riser/arm thingy 90° (slowly, and don’t grab onto the fragile parts). Also, raise your tone arm so you don’t damage your needle during the process, before tightening the screw, make sure your tone arm can safely rest perfectly in its recessed holder, then tighten the screw slowly (NOTA: It is recommended to use T2 phillips or 1/16 flathead)
- 【Easy Installation】The installation only takes a short 2 to 3 minutes to replace the damaged 100HP1632A turntable lock
- 【Perfect service】If you have any questions about our 100HP1632A turntable lock, such as product quality, model, size, etc, please feel free to contact us, we will solve the problem for you as soon
Product Description
Sxkxm 100HP1632A Turntable Lock, for Audio Technica Turntable AT-LP120Type: Turntable Tonearm LockInstallation InstructionsWhen installing the turntable lock clamp, riser the clip is attached to has a tiny screw that you have to remove (don’t lose it), carefully turn that riser/arm thingy 90° (slowly, and don’t grab onto the fragile parts). Also, raise your tone arm so you don’t damage your needle during the process, before tightening the screw, make sure your tone arm can safely rest perfectly in its recessed holder, then tighten the screw slowly (NOTA: It is recommended to use T2 phillips or 1/16 flathead)
