OBD OBD2 Hardwire Kit Power Cable for Dash Camera with USB Type C 12-36V to 5V 3A, Low Voltage Protection 24h Parking Monitoring/Acc Mode with Switch for GPS, Radar 3.5 m (90 Degree USB C)

About this item

• OBD and OBD2 dash cam power supply, suitable for most dash cams, GPS, radar and dash cams on the market. Simply plug directly into your car's OBD or OBD2 port. Note: This device does not work with EV car/electric vehicle
• Two working modes: 24h parking/ACC mode switch. Mode 1: In this "MODE -", 24H parking monitoring, the power supply after the car is switched off until the voltage of the car battery is lower than 11.6V, the OBD power cable stops the power supply automatically after a delay of 5 minutes
• Mode 2: press the red button switch to "MODE O" - the car will light and start the power supply, and the OBD line will automatically stop the power supply, after the car is turned off and delayed for 20 minutes, turn off the output
• Low voltage protection: OBD2 dash cam power cable built-in intelligent control chip, which can detect the battery power of the car in real time. When the battery voltage drops to the undervoltage protection value 11.6 V, the current output automatically goes into the undervoltage protection and turns off the output, so that it cannot be discharged the battery
• Right Angle C Type OBD 2 Dash Cam Cable:90 degree Type C USB obdii adapter greatly improves the applicability of this cable in all kinds of settings, avoiding damage to the cable by bending. Perfect for tight spaces such as cars, corners etc