Zoom V3 Vocal Processor Battery Bundle with MS7701B Euro Boom Mic Stand, HRM-11 Mount, 20-Ft XLR, and AA Batteries — 16-Effect Vocal Processor for Busking, Karaoke, Streaming, Live Performance

Product Information

About this item

• UNTETHERED VOCAL PROCESSING RIG — BATTERY-POWERED V3 + EURO BOOM STAND + 11-IN MOUNT + 20-FT XLR + AA SPARES: Performing vocals off-grid needs more than the processor — you need a stand at vocalist height, a mount within reach, a long cable, and spare AA cells. This bundle pairs the Zoom V3 vocal processor with the On-Stage MS7701B Euro boom tripod, the Zoom HRM-11 aluminum mount, a 20-foot balanced XLR, and a 5-pack of AA cells. Buskers and worship leaders — plug in and sing.
• MULTI-EFFECTS VOCAL PROCESSOR WITH 3-PART HARMONY AND PITCH CORRECTION: Built for singer-songwriters, busking vocalists, karaoke hosts, and worship leaders who want studio vocal effects on the road, the V3 delivers 16 onboard voice effects, real-time 3-part harmony keyed to chromatic detection or a chosen key, natural-sounding pitch correction with a Hard Tune robotic mode, and an XLR mic preamp with +48V phantom power. Plug in the mic and sing.
• 5 CONCURRENT EFFECT BLOCKS FOR LIVE SINGING, KARAOKE, AND BUSKING: Five of the V3's 16 effects run simultaneously — pitch correction can stack with harmony, reverb, delay, and compression in a single chain without external pedals. Dedicated Reverb, Delay, and Compression knobs operate independently of the effect engine for always-on studio polish. One vocal source, a full studio chain, no patching.
• USB 2-IN/2-OUT CLASS-COMPLIANT AUDIO INTERFACE FOR STREAMING AND DAW RECORDING: The V3 is also a class-compliant USB 2.0 audio interface — 2-in/2-out at 24-bit/44.1 kHz. When wall power is available, plug a laptop into the USB port and the processed vocal streams direct to OBS, Streamlabs, GarageBand, Logic Pro, Ableton Live, or any DAW. The 3.5mm aux input mixes a backing track through the processor too.
• ON-STAGE MS7701B — A 36-64 IN EURO BOOM TRIPOD STAND THAT HOLDS THE V3 AT VOCALIST HEIGHT: The MS7701B uses a single-handed steel midpoint Euro-style clutch that locks at any height between 36 and 64 inches without re-tightening through a full set. 30-inch removable boom arm extends mic placement, 23-inch base spread keeps the rig stable, and 5.2 lb of hybrid sheet-metal-and-composite construction folds flat for the car between gigs.
• HRM-11 11-IN ALUMINUM RECORDER MOUNT + 20-FT XLR CABLE + AA 5-PACK FOR BACK-TO-BACK SETS: The HRM-11 clamps to any 5/8"-27 mic-stand thread and holds the V3 at vocalist height — every effect knob within fingertip reach mid-take. The included 1/4"-20 brass adapter fits camera tripods for livestream rigs. The 20-foot balanced XLR (male to female) runs the mic to the V3 across the full stage, and the AA 5-pack swaps in for fresh battery life between sets.
• COMPATIBLE WITH ANY XLR MIC, MAC AND WINDOWS DAWS, AND STANDARD MIC STANDS: The V3 XLR input accepts any broadcast dynamic, large-diaphragm condenser, or handheld vocal mic with +48V phantom on tap. USB 2.0 is class-compliant on Mac and Windows — no drivers, no interface ritual. The MS7701B's 5/8"-27 top thread fits every standard mic clip, and the HRM-11 fits every common boom or tripod stand. One bundle, every vocal performance off-grid.