JINTAI PCIE 6Pin 1 Male to 4 SATA GPU Power Supply Cable for Corsair RM850

Product Description

Replacement For Corsair RM850 RM1000 Installation Steps: 1. Ensure the computer or mining rig is powered down and unplug the Corsair PSU's wall power cord. 2. On the Corsair RM850/RM1000 modular panel, locate a 6-pin port labeled “6-PIN PCI-E” or “PERIPHERAL”. Firmly insert this ca.b.le's single 6-pin male connector. 3. Connect the ca.b.le's four 6-pin female connectors to the 6-pin power sockets on your GPUs (e.g., GTX 1060, RX 570). 4. Ensure all five connection points (1 at PSU, 4 at GPUs) are secure. Route ca.b.les neatly to avoid tangling or excessive tension. 5. Reconnect power and boot the system. Use monitoring software to verify power delivery and operational status of each GPU. Precautions: 1. This ca.b.le draws power from a single PSU 6-pin port. Verify your Corsair PSU's per-rail output and calculate the total power draw of all four GPUs. Do not overload. 2. This ca.b.le is only for the specified ports on Corsair RM850/RM1000 PSUs. Never use with other PSU brands/models, or connect to non-GPU devices like motherboards or CPUs. 3. Both ends of this ca.b.le are 6-pin. Confirm your GPUs require only 6-pin power. If a GPU needs an 8-pin or 6+8-pin connection, do not use this ca.b.le; use dedicated 8-pin or 6+2-pin ca.b.les instead. 4. For high-load multi-GPU operations, ensure adequate ventilation and periodically check the temperature at ca.b.le connectors to prevent overheating. If you have any questions, please contact our customer service!