24V LED Light Board Replacement Compatible with Flashforge Adventurer 5M/5M Pro, 3D Printer Accessories 7Pcs Lamp Beads with Cable Flexible Bright Lighting Strip (No Magnets)

About this item

• Compatibility with Adventuer 5M/ 5M Pro: This upgrade LED light strip is compatibility with Flashforge Adventuer 5M/5M Pro 3d printer. (PS: Regular 5M lacks lighting control port; use external switch or power off.)
• Voltage: 24V, Current: 0.2A, Power: about 4.8W, 7pcs cold white light lamp chips, led light length approx. 23mm/9.06in, with two 8.5mm mounting holes, power cable lenght 71.5cm/28.15in for connecting led and PCB control board(Connecting the LED yellow port on the motherboard), connector: XH2.54-2pin, supply power, plug and play
• Easy to assemble and install: For standard ad5m non-Pro edition, we recommend that you install the light bar on machine both sides, magntically fastened. For 5m pro, you can mount it on the front panel or the side panel, screw or magntically fastened, please tidy up the wiring sequence, you can slide the extruder print head to see if it will hit the light bar during the installation process, and adjust the mounting position appropriately to avoid x/y calibrations affected
• Good modification allows better viewing of the hotend extruder print head from camera, 0.4mm brass nozzle or 3d printings part, operation of the printer, replacement of 1.75mm filament, etc
• Note: This LED light strip is primarily designed for AD 5M Pro and can also be used with AD 5M series printers. However, the interface must be connected to the motherboard, and the power switch cannot be controlled through the screen interface—it operates solely through the printer's main power switch