MOCREO Smart Door Window Sensor Alarm, Left Open Alert, Pro Hub Required
Product Information
About this item
- Add-On Door Sensor for MOCREO H5-Pro or H6-Pro Hubs, No Bluetooth - Check which hub you own before ordering. This smart door sensor reports to a MOCREO H5-Pro or H6-Pro hub and to nothing else, and the hub is sold separately. It does not work with the H5-Lite, H6-Lite, H3, H2, H1B or a hub from another brand. There is no Bluetooth inside, so your phone will not find it by scanning; you add it in the MOCREO Smart App by scanning the QR code. One Pro hub carries up to 30 MOCREO sensors.
- Door Left Open Alert on a Timer You Set - The worry is rarely whether the door opened; it is whether you closed it. Set your own limit in the app - five minutes, ten, an hour - and this door and window sensor tells you when a door, window, cabinet, refrigerator or safe has stayed open past it. That covers the fridge door that never quite latched, the garage side door left standing after a trip to the trash, and the basement door a child pushed open behind them.
- 2000 ft Range for the Garage, Basement and Shed - The doors nobody checks are the ones furthest from the router: a detached garage, a basement two floors down, a backyard shed. This long-range door sensor holds its link up to 2000 ft in open line of sight and pushes through thick walls, where a Wi-Fi based sensor would already have dropped off. Walls and interference shorten that figure, so confirm the signal before you stick it down. It is not weatherproof: keep it out of rain and direct sun.
- Anti-False-Alarm: Filters Wind and Bumps, Double-Checks Each Signal - A sensor that cries wolf gets muted, and a muted sensor is worse than none. This contact sensor filters out wind gusts and passing bumps rather than reporting them, and it checks each open or close a second time before it sends anything, with a short debounce and repeated retries so a real event is not lost to a dropped packet. Fewer alerts arrive, and the ones that do are worth looking at.
- Two Standard AAA Batteries, Hourly Self-Check - Mount it and leave it. This wireless entry sensor runs on two standard AAA batteries you can buy anywhere and swap yourself; there is no charging cradle and no proprietary cell to hunt for. It also checks in with the hub every hour on its own, so a sensor that has quietly gone offline shows up as a problem instead of as silence.
- App Alerts and Open-Close History, No Subscription - Everything the sensor does is included: real-time notifications, the open and close log in the MOCREO Smart App, and alert rules you write yourself. The hub keeps your last 30 events on hand. There is no monthly fee, no contract and no feature held back behind a plan, and remote viewing needs nothing more than the hub being online.
- 30-Second Setup: Scan, Peel and Stick - Two pieces, sensor and magnet: scan the QR code, peel the 3M backing, stick the sensor on the frame and the magnet on the door or window so the two sit side by side when it is closed. Works the same on a cabinet, a chest freezer or a shed door. No wiring, no drilling, no holes in your trim, and nothing to unscrew when you move it somewhere else. Renters and anyone who would rather not put a screw into a door frame can mount it and take it with them.
Product Description
Did I close it? That question is why most people buy a door sensor, and it is the one a plain open/close alert never quite answers. The MOCREO LD1 is built around the other half of it: you set a limit in the app, and if a door, window, cabinet, refrigerator or safe stays open past that limit, you hear about it. Five minutes on the fridge. An hour on the garage side door. Whatever the door is worth to you.What it does - Tells you the moment a door or window opens or closes - Door-left-open alerts on a timer you set per sensor - Long-range link up to 2000 ft in open line of sight, through thick walls - Anti-false-alarm filtering for wind and minor bumps, with a second check before sending - Runs on two standard AAA batteries you can replace yourself, with an hourly self-check - Open and close history in the app; the hub holds your last 30 events - Two-piece magnetic design with peel-and-stick 3M mounting, no wiring and no drillingIt works with a MOCREO Pro hub, and only a Pro hub LD1 pairs with the MOCREO H5-Pro and H6-Pro hubs only, and the hub is sold separately. One Pro hub carries up to 30 MOCREO sensors in total, so LD1 units and other MOCREO sensors can share the same hub. It does not work with the H5-Lite, H6-Lite, H3, H2 or H1B, and it does not work with a hub from another brand. There is no Bluetooth inside it, so it will not pair directly with a phone and it cannot be used on its own. Check which hub you own before ordering. To add it, scan the QR code on the unit in the MOCREO Smart App.Where people put it Front and back doors, sliding patio doors, windows on the ground floor, cabinets and drawers a child should not be opening, a chest freezer or refrigerator door, a gun safe, a basement door, a detached garage, a shed or a barn. The range is what makes the last few of those possible; a sensor that has to reach your Wi-Fi will not. Mount it on the sheltered, inside face in each of these spots.Good to know LD1 reports openings and closings. It is not a security system, it does not stop an intruder, and it has no camera, siren or motion detection of its own. Anti-false-alarm filtering reduces nuisance alerts rather than eliminating them. Range depends on walls, floors and interference, so confirm the signal at the planned location before mounting. LD1 is not weatherproof: mount it indoors or under cover, since rain, direct sun and extreme heat shorten its service life. Batteries are replaceable, not rechargeable. Remote alerts require the hub to be online.










