IIWEY OBD Charger for Dash Cam, Plug-and-Play Parking Mode Power Cable with Low-Voltage Protection, 12V/24V to USB-C 5V/2.5A, 11.5 ft, 3/5/10-Min Delay

About this item

• For IIWEY Brand Dash Cam: N5,N5 Pro,N6,N9,Q5,Q7
• PARKING MODE POWER AFTER SHUTDOWN - Unlike many cigarette-lighter chargers that turn off with the ignition, this OBD power cable keeps supplying power after you park, allowing a compatible dash cam to use supported time-lapse or collision-detection parking features.
• PLUG-AND-PLAY INSTALLATION - Skip the fuse box, wire tapping and complicated hardwiring. Plug the adapter into your vehicle's OBD port, route the 11.5-ft cable along the trim, then connect the right-angle USB-C plug to your dash cam.
• BUILT-IN LOW-VOLTAGE PROTECTION - The charger automatically cuts dash cam power at 11.8V on 12V vehicle systems, helping preserve enough battery power for the next start. The adapter supports both 12V and 24V vehicle input.
• POWER AND GROUND CONTACTS ONLY - The two-contact OBD design uses only power and ground and does not connect to vehicle data or CAN lines. This helps minimize the risk of data-related communication errors or warning messages.
• SELECTABLE 3/5/10-MINUTE DELAY - Choose a motion-based delay before parking mode begins. Brief stops, such as waiting at a red light, reset when the vehicle moves again. Output is USB-C 5V/2.5A; verify your dash cam's port, power requirement and parking-mode support before purchase.