Product Information
About this item
- One‑Way Valve Protection: Inside this brake bleeder kit, an aluminum check valve keeps fluid moving in a single direction — out of the caliper and into the bottle. Air and old fluid are blocked from returning, which helps deliver a bubble‑free bleed, a firm brake pedal, and reliable braking after every service
- Extended Hose & Hands‑Free Hook: The two hoses on this brake bleeding kit add up to 27.95 inches, giving you generous reach to the bleeder screw. A built‑in hook and chain let you hang the collection bottle from the suspension or frame, so both hands are free for the brake pedal — solo bleeding made simple
- Repeat‑Use Construction: This brake system bleeding tool is designed for ongoing service. The PE collection bottle and PVC hoses handle brake fluid exposure without breaking down. After the job, rinse the parts with water, dry them off, and tuck everything away until the next maintenance session
- Broad Vehicle Fit: This brake fluid bleeder fits hydraulic brake and clutch systems on cars, trucks, SUVs, and motorcycles. The hose slips securely onto most standard bleeder valves, creating a tight seal that keeps the work area clean. A practical choice for home garages and professional workshops alike
- Step‑by‑Step Bleeding: Connect hoses to valve ends and bottle. Fit the connector to the hose tip — note the arrow on the valve points toward the bottle. Clamp connections, attach to bleeder. Press brake pedal; keep hose filled, free of bubbles. Repeat until fluid runs clear and bleeding is finished
Product Description
One‑Way Flow, Hands‑Free Hook — The Reusable Kit That Makes Solo Brake Work SimpleProduct AttributesColors: TranslucentSizes: 8.26*3.63*3.63 inchWeight: 7.10 ozMaterial: PE, PVCPackaging: 1*Bottle, 1*One-Way Valve, 2*Hoses, 2*Connector, 4*Hose Clamps, 1*DropperPackage Sizes: 11.81*8.26*3.73 inchHow to Install1. Connect two hoses to either end of the check valve2. Connect the other end of the hoses to the brake fluid reservoir3. Attach the connector to the end of the hose4. Pay attention to the flow direction of the check valve (the arrow should point toward the brake fluid reservoir)5. Secure each connection with a hose clamp to prevent fluid leaksInstructions for Use1. Connect the brake bleeding hose to the catch bottle2. Attach the hose to the bleeder screw at the brake farthest from the master cylinder3. Open the bleeder valve on the vehicle and pump the brake pedal several times4. Once the hose is filled with brake fluid and no air bubbles are visible, close the bleeder valve. Repeat this process for the remaining wheelsProduct Functions & Features1. One‑Way Valve Protection: An aluminum check valve keeps fluid moving in a single direction, blocking air and old fluid from returning into the caliper for a bubble‑free bleed and a firm, responsive brake pedal2. Hands‑Free Hook & Extended Reach: Two hoses combine to span 27.95 inches, giving generous reach to the bleeder screw. A built‑in hook and chain let you hang the collection bottle from the suspension or frame, freeing both hands to work the brake pedal3. Reusable PE & PVC Build: The PE collection bottle and PVC hoses resist brake fluid degradation and rinse clean after each use. The complete kit includes a bottle, one‑way valve, two hoses, two connectors, a dropper and four hose clamps for wide compatibility with cars, trucks, SUVs, and motorcycles
