16 Pack Sublimation Sports Water Bottle blanks, Sublimation Tumblers, Double Wall Stainless Steel Sports Water Bottle Flask with Portable Handle, 18oz White

Product Description

Key Features304 STAINLESS STEEL & VACUUM INSULATIONCrafted with a premium 304 stainless steel interior and double-wall vacuum constructionCapacity: 18 oz Cup mouth: 7.5 cm/ 2.9 inch Cup height: 23 cm/ 9.05 inch Cup bottom: 7.5 cm/ 2.9 inch Lid Type: Straw lidDouble-wall vacuum insulatedCoated for sublimationNo logo on the bottle for easy customizationThis tumbler is easy to customize, easy to carry, and well suited for personalized projectSublimation UV Printing Laser Engrave UVDTF EpoxySublimation Process InstructionsStep 1: Prepare your designPrint your design using sublimation ink and paper according to your printer manufacturer’s instructions.Step 2: Attach design to tumblerWrap the printed paper tightly around the tumbler. Use heat-resistant tape to secure it – do not tape over printed areas.Step 3: Apply heatBake 375 °F for 5-6 minutes. If laying tumblers in oven horizontally, rotate 180° halfway through baking, at about 3 minutes. seconds.For press sublimation: Use a tumbler heat press with even pressure. Heat for 40–60 seconds.Step 4: Cool and remove paperRemove tumbler from heat source. Let it cool for at least 2–3 minutes at room temperature. Then carefully remove the paper.Step 5: Final inspectionCheck for full ink transfer and even coating. Slight handling warmth is normal, but the tumbler should not remain hot to the touch beyond 1 minute after cooling.Warm TipsHandwash is recommended.