Cloning Remote Control Keychain, Replacement for Universal Garage Door Gate, 4-in-1 Wireless 433MHz Copy Remote Controller, Remote Control Duplicator for Cars Symbol ABCD (Black-Blue, ABCD)

About this item

• Application Applicable to automobiles, garage doors, doors, skylights, car/motorcycle alarms, home safety products, short-distance wireless remote control products, electrical appliances/home automation lamps, industrial control products, etc. There are 4 buttons one each of the remote control key fobs, which can help you control the devices precisely. The 433.92mhz fixed frequency remote cloner for copying 99.99% common fixed and learning code remote controls.
• Wireless remote control is not a universal remote control, you need to meet the following three conditions, you can easily and quickly generate another new remote control with the same function. Condition 1, the original remote control is able to be used normally Condition 2, clear the original remote control transmitter frequency Condition 3， The coding chip of the original remote control is clear (see the following list for commonly used coding chips). Condition 4, if there is no word on the remote control chip, check the foreign non-standard code remote control brands and pictures that can be copied.
• The common coding chips for the original remote control that can be copied are as follows: 2260 (all manufacturers), 2262 (all manufacturers), PT2264, SMC5326 (all manufacturers), SC5262, HT12E, HT12D, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918, SM5028S, series, 527 (all vendors), 1527 (all vendors), 2240 (all vendors) and foreign non-standard codes, see the list for detailed brands.
• Scope of application (1) Rolling door, rolling window controller; (2) Road gate, telescopic door controller; (3) Bus door control system; (4) Remote control system; (5) Intelligent home system; (6) Remote control door opener; (7) Wireless security alarms; (8) Remote control curtain machine; (9) Wireless industrial controller; (10) RGB strip light, strip light, lighting fixture control;
• This remote control with the remote control you are using to learn to copy before you can use! A total of 2 steps: 1 is clear code, Note: Press the AB button of the remote control at the same time, the indicator light blinks for a while and then does not light up! Only then can you go to tap three times! Just like your video this kind of always on is transmitting data, not clear code state! Let go at the same time press, if it is still re-press at the same time, until the blinking is not bright and then go to point three times, this time the indicator will keep blinking, OK!
• 2 steps: the code: the old and new 2 remotes parallel next to each other, at the same time, press the corresponding code key, such as the new remote control lights have been blinking, the key to the code success, and then go to operate the corresponding other buttons! If the copy is not very good, after clearing the code to re-copy.
• Another thing to pay attention to is: you copy the use of the remote control frequency is not the same! And then the working chip of the product is not fixed code, learning code? Rolling code of a part can not be completely! Need to apply for a special rolling code remote control to copy. If there are technical problems, you can contact us at any time!