Crank Puller Bicycle and Bottom Bracket Tool, Bicycle Crank Puller for 16 mm Wrench Bicycle Bottom Bracket Remover Puller Tool Set Compatible with (Shimano/ISIS/Octalink)
Product Information
About
Crank puller bicycle and bottom bracket tool kit: this crank puller kit contains 1 x bicycle crank puller, 1 x top cap, 1 x bottom bracket tool, 1 x bottom bracket puller anti-fall tool, 1 x lubricating oil, 1 x lubricating grease, 1 x double end wrench, 1 x Allen key, with bottom bracket extractor kit, you do not need to buy the crank puller and bottom bracket tool separately, the crank puller As a bicycle set as a bicycle Tool ideal for cyclist enthusiasts
Bicycle crank puller - The wheel crank puller is made of high-quality carbon steel; the hard thimble and precision thread do not hurt the crank thread. You only use a 16 mm wrench or adjustable wrench to insert and remove the bicycle crank, when removing bicycle crank, screw the bicycle crank puller into the threads completely until it is fully tightened to remove remover, otherwise damage to the threads
Bottom bracket tool with anti-fall tool: the bottom bracket puller is made of high carbon steel, inner bearing tool comes with 20 teeth groove design, which is compatible with all 20 pinion bottom bracket and standard square crankset. The anti-fall tool helps you fix the bicycle bottom bracket tool well to prevent it from falling out, which you remove the bottom bracket easily. Use the large end of the double end wrench to remove the bottom bracket tool
Bicycle crank puller kit for widely used: crank puller bicycle and bicycle bottom bracket tool is mainly used for the installation and removal of cranks, splined teeth and standard square bicycle bottom bracket, compatible with standard, square and splined bottom bracket. Crank puller and bottom bracket tool is almost for repairing most bicycles, such as mountain bikes, road bikes, children's bikes, commuter bikes or electric bikes, etc
Notes: Before you buy this crank puller kit, if the crank nut is Allen key, please use our Allen key, if it is outer hex nut, you can directly use the silver end of our bicycle crank puller to remove the nut. A separate wrench is required for removing crank, you need to buy it yourself
【Notes】② If you use crank puller, make sure the black end is tight, strengthen it with a wrench and then screw in the silver hexagonal end, which is less likely to damage the thread. ③ When using the bottom bracket tool, if the bottom bracket is square, please install the bottom bracket puller first and then the anti-fall tool. When the bottom bracket is toothed, work in reverse order
Notes: ④ When you install the pedals, please distinguish between left and right, and make sure the crank is on the same level. ⑤ Use of lubricating oil and grease: when you take off a bicycle crank, apply the lubricating oil to the crank thread to easily remove the nut; When mounting the bottom bracket, apply grease to the bottom bracket and the inner wall of the crank to facilitate the maintenance of the bottom bracket and crank
