Faithful Panda Cork Coaster Blanks for Laser Engraving 100 Pack 3.5 Inch
Product Information
About
100 LASER-READY BLANKS, ZERO PREP — Set your focal point once and engrave the whole batch. Fine-sanded uncoated surface gives crisp, repeatable marks on UV, diode, and CO2 lasers with no coating to burn through, no chemical smell, and no wasted blanks. Each disc is 3.54 in (90 mm) across and 3.5 mm thick.
STRAIGHT-CUT EDGES & CONSISTENT THICKNESS — Die-cut flat edges, not beveled or rounded, so blanks stack and package cleanly and finished pieces look professional, not handmade. Thickness holds at 3.5 mm positive tolerance — never under spec, so every batch engraves at the same focal depth.
WORKS WITH EVERY MAKING METHOD — Compatible with UV, diode, and CO2 laser engravers, plus sublimation, wood burning, pyrography, stamping, and painting. The uncoated cork takes full-surface transfers and clean burns without a dye layer or sealant in the way.
NATURAL CORK, USE PLAIN OR PERSONALIZED — No dyes, no coating, no chemical odor. Absorbs condensation, grips the table without slipping, and cushions drinks quietly — a finished coaster for your coffee bar, restaurant, or home, or a blank ready for your design.
BUILT FOR ETSY SELLERS, WEDDING VENDORS & BULK BUYERS — 100 blanks per pack is enough for a full product batch, a wedding order, or a venue restock in one purchase. Consistent size, weight, and surface across the pack means no sorting, no rejects, no surprises mid-project. Who it's NOT for: buyers looking for pre-decorated coasters — these arrive blank, ready to make your own.
Product Description
Blank Cork Coasters, Ready for Your LaserA 100-pack of laser-ready cork blanks made for people who create. Every disc arrives unfinished, uncoated, and ready to engrave straight from the box, so you can go from raw material to finished, personalized product without any prep step.Straight-Cut Edges, Not RoundedEach blank is die-cut with flat, straight edges rather than beveled or rounded ones. They stack cleanly, package cleanly, and finish looking professional rather than homemade. Diameter measures 3.54 in / 90 mm.Positive Thickness ToleranceThickness is held at 3.5 mm positive tolerance, meaning 3.5 mm or slightly over, never under. Set your focal depth once and run the entire batch with consistent results from the first piece to the last.Works With Every Making MethodLaser engraving: compatible with UV, diode, and CO2 machinesSublimation: takes full-surface transfers on a smooth baseWood burning and pyrography: clean, controlled burnsStamping and painting: an even surface for DIY craft workThe fine-sanded, uncoated surface has no dye layer and no sealant to burn through, which means fewer defocused marks and fewer wasted blanks.Built for Etsy Sellers, Event Pros and Small ShopsCraft sellers filling personalized coaster ordersWeddings and events with names, dates, monograms, table numbersCoffee bars and restaurants adding a branded touchHobbyists exploring laser, sublimation, and wood-burning projectsPack Sizes That Match Your Workflow30 to sample and test. 50 for small batches and events. 100 for production runs. 200 for volume orders. Same cork, same cut, same tolerance across every pack size, so what you test is what you scale with — and what you reorder next month.Natural cork. No dyes, no coating, no chemical odor. Use them engraved, or keep them plain.Frequently Asked by Makers Will these work with my CO2, diode, or UV laser? Yes - the uncoated cork engraves cleanly on all three without a coating to burn through. Can I use them without engraving? Yes - they are natural cork coasters ready to use plain: absorbent, non-slip, and odor-free. What size are they? 3.54 in (90 mm) diameter, 3.5 mm thick, held to a positive tolerance. How many per pack? 100 blanks in this listing. These arrive blank and unfinished — if you're looking for pre-decorated or ready-to-use printed coasters, this is not that product.
