Garage Door Opener Safety Sensor Kit for Craftsman & for Chamberlain 13953962SRT1, 13953963SRT, 13953964SRT, 13953965SRT, 13953966SRT1, 13953970SRT, 13953971SRT, 13953973SRT US Stock
Product Information
About
Product Oveview: Garage Door Opener Safety Sensor Kit for Craftsman & for Chamberlain 13953962SRT1, 13953963SRT, 13953964SRT, 13953965SRT, 13953966SRT1, 13953970SRT, 13953971SRT, 13953973SRT US Stock
Compatibility: This safety sensor replacement for only made after 1997 to Current for Liftmaster / for Chamberlain / for Sears Chamberlain / for Wayne Dalton garage door openers.
Working Mode: The sending sensor (with an amber LED) will transmits an invisible light beam to the receiving sensor (with a green LED) when the sensors detect an obstruction, then the door will automatically stops closing and reverses direction.
Installation Tips: Be sure disconnect power from garage door openers Before installing the safety reversing sensor. The safety reversing sensor beam must install NO HIGHER than 6°(15 cm) above garage floor; Package Includes: 2x Garage Door Opener Safety Sensor Kit
【Brand - YTXXDEUS】: Please feel free to reach out to us if you had any problem with this product - YTXXFBA-3647-010, we will support you at your side
Product Description
YTXXDEUS Garage Door Opener Safety Sensor Kit for Craftsman & for Chamberlain 13953962SRT1, 13953963SRT, 13953964SRT, 13953965SRT, 13953966SRT1, 13953970SRT, 13953971SRT, 13953973SRTDescription: 41A5034 safety sensors are made with high-quality ABS material for long-lasting service life. Replacement for your old safety sensor kit that have a green LED light on one side and a yellow light on the other side Fit for Liftmaster Sears, for Chamberlain, for Craftsman Master Mechanic, and for Wayne Dalton manufactured from 1997 to present. With a red & orange or purple learn button on the back of the garage door opener. Package Include: 2x safety sensors (green light sensor + amber light sensor), 2x mounting screws + 2x wing nuts + 5x wire crimps Installation Notes: 1. Slide the curved arm of the sensor bracket around the edge of the door rail. It snaps into place so that the sensor bracket is flush with the track; 2. Slide the bracket bolts into the slots for each sensor; 3. Thread the bolts through the holes in the sensor bracket and secure with the wing nuts. The lenses on both sensors should point towards each other. Make sure the lens is not blocked by the sensor holder.If you had any concern about this product - YTF3647-010, please feel free to reach out to us.Decades of Experienced Store - YTXXDEUS, Reliable Very Much
