Putty Cement Grouting Spraying Machine Spray Foam Machine,Mortar Spray Plastering Machine for Water Sand,Putty,Caulking Plaster Plaster 3kw 220v

Product Information

About

[High-flow Spraying] The maximum spraying flow rate can reach 18L/min, and the pressure can be adjusted to 30KG(66LBS), which can significantly improve the spraying efficiency and save unnecessary operation time.
[Convenient Feeding] It adopts a 48L large-capacity open hopper and an open top cover, making feeding more convenient.
[High-pressure Resistant Delivery Pipe] High-pressure resistant conveying pipes (with a burst pressure of 90 kilograms) and wear-resistant components are adopted. Before starting the machine, it is necessary to check for any leakage and other safety measures to ensure the machine can operate. Note that the abrasiveness of the material will affect the service life of the machine components.
[Widely Use] Multifunctional mortar spraying machine is suitable for real stone paint, water sand, putty, caulking plaster plaster, latex paint, leveling mortar, bonding mortar, diatomium mud elastic coating, waterproof and fireproof JS and other materials.
[Product Parameter] Properties: DC brushless, Motor power: 3000W, Rated voltage: 220V,Minimum flow rate: 0.6L/min, Maximum flow rate: 18L/min, Maximum adjustable pressure: 30 KG, Randomly configured nozzles: 4, 6, 8, Random distribution pipe: 24.6ft (7.5meters), Maximum conveying height: 65ft (20 meters), Burst pressure of feed pipe: 198LBS (90KG)

Product Description

Operation Way:1. Do not use this sprayer for the spraying of oily materials.2. Connect the air pressure sensor to check whether there is air leakage at the connection part of the gas pipe (this machine is pneumatic induction control, air leakage will affect the sensitivity of the switch.3. Before starting each time, please inject the mixed cooked rubber powder (or diluted real stone paint) into the hopper first. Start the cooked rubber powder or real stone paint from the other end of the high-pressure pipe can flow out. (Before this operation, please remove the nozzle to prevent the residual old material in the material tube from blocking the nozzle.4. Plug in the power, switch to the automatic position, motor control the switch, and confirm that the switch indicates the automatic state.5. After turning on the air source switch, slowly adjust the potentiometer switch clockwise, and reconfirm that the material pipe and the connecting parts are intact without leakage, then pour the normal use of real stone paint. When used, the speed should not be too fast, and the corresponding nozzle discharge amount is good enough for normal use, otherwise it will reduce the service life of the rubber sleeve screw.