Side Cutter Overlock Presser Foot, Stainless Steel & Plastic, FRYJ-02 for Singer, Brother, Babylock, Janome, Kenmore, etc.
Product Information
About
❤ GOOD FOR SEWING: The Side cutter dimension with 2.76 x 0.98 x 1.57 inches. The Side Cutter Attachment trims fabric while you sew a seam. Sew seams and seam finishes simultaneously.
❤ BEST PRESSER FOOT FOR QUILTING: It will make an overlock stitch by cutting the fabric. Very compact sturdy design and sharp cutting.
❤ EASY TO USE: Widely used in clothes and other projects with lightweight fabric. The side cutter gives garments a professional finish. Just use the zig zag or over edge stitch to complete your look.
❤ APPLICABLE SEWING MACHINES: The Darning & Embroidery Foot can be used for free-motion quilting, stippling, thread painting, monograms, and even for repairing torn areas. This foot is one of the most versatile sewing accessories in your sewing room.
❤ SERVICE GUARANTEE: when you receive product which have any quallity issue, it can support 100% refund or replacement. Any query, please feel free to contact us.
Product Description
Features: ●Creates the perfect cut edge like a serger or overlock. ●This sharp cutting side cutter is perfect for you to do your craft project. Specification: Type: Side Cutter Presser Foot Material: Stainless steel, plastic Quantity: 1pcs Fit for all low-shank sewing machines, including Singer, Brother, Babylock,Viking (Husky Series), Euro-Pro, Janome, Kenmore, White, Juki,Bernina (Bernette Series), New Home, Necchi, Elna, etc. Size: 7*2.5*4cm / 2.76*0.98*1.57inch (L*W*H) Package: 1*Side Cutter Presser Foot 1*User Manual Installation 1.Remove original presser foot, mount and lock this presser foot side cutter foot. 2.Thread top thread and bobbin thread completely. 3.Set needle position to far‑left, ensure needle never touches blade. Machine Settings ‑Stitch: Zigzag / overlock stitch (Do not use straight stitch) ‑Stitch width:3‑4mm ‑Stitch length:2‑2.5mm Operation Steps 1.Put excess fabric edge into the right‑side blade gap. Keep reserved seam allowance on blade left side. 2.Hold fabric edge against blade, run sewing machine and feed fabric gently. 3.Test sew 2‑3cm on scrap fabric first, check no needle collision and clean cut edge. Important Notes ‑Recommended for cotton, chiffon and light‑medium fabrics. Thick denim and heavy multi‑layer fabric may not cut through. ‑When turning corners: raise presser foot and rotate fabric, keep fabric edge close to blade. ‑If fabric not cut: confirm fabric is inserted into blade gap or check blade condition. ‑Do not cut fabric without sewing, this is not standalone cutting tool. ‑The finished edge cannot fully match output from professional serger machine.
