SmarToggle Single Gang Retrofit Wall Box – Old Work Electrical Box for Stud or No-Stud Mount | 1-1/2" Toggle Depth | Smart Device, Outlet, or Switch PC Wall Box | Rated 50 lbs Load, 10-Pack

Product Information

About

Dual-Mount Retrofit Design – Stud or No-Stud Compatible: The only retrofit wall box that installs easily in stud or no-stud walls, ideal for remodels, upgrades, and smart home device installs.
Snap-In 1-1/2" Toggles for Reliable Fit: SmarToggle’s 1-1/2" snap toggles lock firmly in place, ensuring a secure, flush installation without dropped boxes or uneven mounting.
19-1/2 cu.in Capacity with 4 Wiring Ports: Spacious single gang electrical wall box supports multiple conductors with four wiring ports and clean wire management.
Single-Screw Mounting Block – Easy Adjustments: The removable block makes changes quick and convenient. Compatible with ST2W/ST3/4W dividers for low-voltage separation.
Durable PC Build – Rated for 50 lbs Wall Load: Crafted from impact-resistant polycarbonate (PC) to support heavy devices like smart switches or outlets with long-lasting reliability.

Product Description

The SmarToggle Wall Box Single Gang redefines retrofit installations with a dual-mount design that works in both stud and no-stud conditions. Its 1-1/2” toggles snap in place securely, keeping the box tight and level. Offering 19-1/2 cubic inches of space, four wiring ports, and an optional divider system, this box delivers exceptional flexibility for both electricians and DIYers. The PC construction provides a sturdy, professional-grade finish that supports up to 50 lbs. Upgrade any wall installation with SmarToggle’s advanced old-work solution — fast, strong, and built for modern smart devices. Ceiling luminaire support box ST1 (rectangular). For use in a finished structure (old work) ½” thru 1” thick.Installation instructions for ST1:1. Make a small hole in the sheet rock at desired light fixture location by using a Philip’s head screw driver. 2. Place the clip-on pilot locator bit (located on the face of the box) into that hole. 3. Use a marker or pencil to scribe a line around the perimeter of the box onto the paint ceiling. 4. Once a clear line is visible, cut away the line with a jab saw to make the perfect size hole every time. 5. Once a hole is cut, pull your romex thru that hole and insert it into one of the (built-in) wire inlets. IMPORTANT Place the box into the hole. Then engage the single screw fastener into a ceiling rafter along with at least 2 toggles for light fixture support of no greater than 50lbs. Note this product is not rated for paddle fan support. IMPORTANT Note 2 different size threaded holes built into the face of the box. The larger holes (8/32) are rated for light fixture support only. The smaller holes (6/32) are rated for device attachment only. Do not use the 6/32 holes for light fixture support.