Solar Hydroponic Air Pump 3 Speeds for Outdoor Fish Aquariums IP55 2200MAH Backup Battery

Product Information

About

[Built-in 2200mAh Backup Battery] Ensure continuous operation day and night, with charging the solar panel during the day and battery power at night.
[Wide Application] Versatile for fish ponds, aquariums, fishing, hydroponics and more, providing essential oxygen where needed.
[SOLAR POWER] No wiring required, for fish and plants, harnessing solar energy for efficient operation.
[3 MODES] Choose between continuous high power, low power or 10-second oxygen pumping cycle to meet different oxygenation needs.
[IP55 WATERPROOF] With IP55 rating, this pump is waterproof and weatherproof for reliable use in all conditions.

Product Description

1. [Built-in 2200mAh Backup Battery] Ensure continuous operation day and night, with charging the solar panel during the day and battery power at night. 2. [Wide application] Versatile for fish ponds, aquariums, fishing, hydroponics and more, providing vital oxygen when needed. 3. [SOLAR POWER] No wiring required, for fish and plants, using solar energy for efficient operation. 4. [3 MODES] Choose between high power, low power oxygen pump, or 10 second continuous cycle to meet different oxygen needs. 5. [IP55 WATERPROOF] With an IP55 protection rating, this pump is waterproof and weatherproof for reliable use in all conditions. Data Techniques: Item Type: Solar Oxygen Pump Material: ABS Solar panel: 6V 3W Battery type: Lithium battery (comes with built-in battery) Battery Capacity: 2200mAh Lifespan 500 times Air pump rated voltage: 3.5V Maximum air pump current: 450mA Bad noise air pump: 50dB Minimum air flow: 0.8 L/min Circuit parameters: Operating Voltage Range: 3.0V-4.25V Maximum working current: 450mA Discharge protection voltage: 3.0V Charging protection voltage: 4.25V Working time: about 16 hours With or without optical control: Without optical control Working Mode: A speed: high performance continuous oxygenation mode B speed: low consumption continuous oxygenation mode C speed: oxygenate for 10 seconds and stop for 10 seconds. Repetition cycle Package List: 1 x Solar Panel 1 x pump. 4 x screws. 4 x expansion screws. 5 x Fixed Fittings 2 x Hose Connector 1 x hose. 1 x Hose Speed Control Connector 2 x Bubble Stone Note: Connect the air stone with the vent and place it in the water that needs to be oxygenated. The solar panel must face sunlight and there should be no obstacles between the solar panel and sunlight. Press the POWER switch and the oxygen enrichment pump starts working. Pay attention to the above: 1. This solar oxygen pump is an electronic product, the oxygen enriching host part cannot be put into the water, the guide hole cannot be blocked. 2. This solar oxygen pump is a solar product. When you attach the solar panel to the sun, make sure there are no obstacles between the solar panel and the sun. The charging speed depends on the strength of sunlight. Regularly cleaning the solar cell of dirt can improve charging efficiency.