Product Information
About
seals gaps up to 25mm under the door
can be cut to size
pre drilled fixing holes
fixings includes
Product Description
Fitting1. With door closed, measure bottom of door width2. Slide brush out of carrier/housing and cut carrier/housing to size3. Using hacksaw cut brush - cut through small metal rod (only 3mm wide) holding brush in placeTipCrimp brush metal housing using pliers to prevent brushes falling out - ie squeeze ends with pliers so they are compressed4. Offer up door seal against door, so bottom of brush is only just above floor surface closing gap between bottom door and floor, and mark where holes appear against door with pencilTipDrill pilot holes for screws so screws can be screwed in without damaging screw head5. Screw firmly to base of door6. Adjust if necessary for perfect fit - slotted holes aid adjustment up or down.
