VidaRosa New UV Epoxy Resin Clear Hard Type 500ml Kit with Lamp Tweezer Dyes Pigment Colorants Set Solid Colors for Jewelry Making, Updated Quality Super Fast Curing for Resin Art Molds Jewelry

Product Information

About

FASTER CURING: The Latest Developed UV Resin can be cured completely hard under a 6W mini UV lamp in only 2 minutes (1 minute curing for both sides), which means less time and lower wattage needed for the curing process, hugely advanced comparing to our past version (4 minutes under 36W).
HIGHER QUALITY: Undoubtedly excellent transparency, 100% crystal clear and non-yellowing, with hard glassy finish and uniform gloss. Comprehensive upgrading: Less shrinking, less bubbles, lower viscosity, better liquidity.
SAFEST FORMULA: Non-toxic, no harsh chemicals, cruelty free materials. Material safety datasheet available for checking. Note: This product is sensitive to light and heat and needs to be stored in a cool, dry place, protected from light.
EASIER TO USE: No preparation is required for the resin. Specially designed nozzle make it easy to control your drops. Perfectly suited for resin jewelry making and crafts decorations, resin pour art, paint, garment accessories and other DIY crafts.
QUALITY DYES: Set of resin dyes with high pigmentation - one drop is enough to give beautiful color effects to the resin art. Using a toothpick to add the pigment is recommended. Feel free to blend the colors you have to make new colors you want. Anti-leak bottle design.

Product Description

Package: 5 x New upgraded UV resin (volume of each: 100ml) 1 x Mini portable USB-powered UV lamp (with USB cable) 1 x Tweezer 13 x Solid color liquid pigment Instructions: -Directly pour the resin in the mold or the bezel. -Add the pigment, glitter, dried flowers or anything you want in it using a toothpick or tweezers, and cure the resin with UV light. -Gradually add the amount of the pigment to adjust the color instead of pouring too much pigment at a time. How to avoid bubbles: 1. UV resin should be poured in silicone molds in layers, allowing air bubbles completely escape. 2. To expedite the process of escaping of bubbles and time of solidification of resin, the mold can be a bit warmed up. For example, heat the oven to 80℃(176℉), turn off, ventilate it a little and filled the mold with the resin. 3. Before using the resin, place it upside down to prevent air bubbles from escaping during extrusion. 4. Use a toothpick to concentrate the air bubbles on the surface of the resin. Puncture them with a pin or undo them by applying heat with a heat gun or a lighter. Attention: -Avoid contact with eyes, skin and clothing. -If you accidentally splash into your eyes, rinse immediately with plenty of water. -Rinse immediately with soapy water after skin contact. -Keep out of reach of children. -Store the product in a cool, dry place, protected from light.