Wire Chimney Cleaning Brush with 5/16" Fitting and 15 Rods, 6 Inch Round Steel Chimney Cleaning Brush, 6 Inch Nylon Brush,16 Inch Long Rods for Fireplace Duct Or Other Streight Duct

Product Information

About

Composition:It consists of 15 Pcs 16.1 Inch long hard rods,1Pcs 6 Inch Round Steel Chimney Cleaning Brush, 1Pcs 1Pcs 6 Inch brush , 1Pcs hexagonal connecting rod , 1Pcs cloth bag and 2Pcs tape. The rods here cannot be bent.The screw thread is 5/16.
Save money: By cleaning the chimney yourself, you can save up to $150 in cleaning fees per times.
Used for: Suitable for cleaning straight chimneys or other straight pipes with a diameter greater than 150mm.
Materials: The stick is made of a hard material. This material is not easy to break and can provide good support for the wire brush. The wire brush is made of elastic steel wire. The nylon brush is made of medium-hard nylon filaments.
Special: The set includes a nylon brush and a wire brush. The nylon brush has soft bristles, making it suitable for cleaning lightly soiled pipes; it also ensures that the pipes are not damaged during the cleaning process. The wire brush is ideal for cleaning chimney pipes with more severe contamination.

Product Description

Note! 1.During use, please wear protective clothing, a mask, and goggles to protect yourself.2. Because this product is measured and produced manually. There may be errors, and the size error will not be greater than 2cm. Please understand! 3. During the cleaning process, when you find that the length of the rod is too long, please remove the unnecessary part of the rod in time, otherwise the long rod may cause several rods to be entangled! 【Warning!】 1.Only rotate the brush/rod assembly clockwise. The opposite direction may cause the brush head or rod to separate in the pipe. Never force the brush/rod assembly through the pipe! If it gets stuck, pull the assembly a few inches away from the narrow area (still rotating clockwise), and then push it forward slowly.2.Do not clean bent duct.