11.5Ft (Straight Mini)

$13.98

★ 4.510 reviews

Product Information

ASINB0DP652TLR

CategoryElectronics

About this item

✪ Application: OBD Power Cable for Dash Camera, is suitable for the ODB port and dashcam. It has two modes: One click to switch: Work on/off with the and 24hour recording. Note: This dash cam power cable OBD2 DOES NOT work with Electric Vehicle.
✪ Two working mode: 2 modes are toggles by a switch on the OBD port. Mode"—": Parking monitoring mode,Surveillance mode provides 24 hr power w/ low voltage protection that shuts down the device to keep it from killing the battery. Mode"O": ACC mode , at this mode your dash camera will turn On/Off when your turn On/Off.
✪ Low voltage protection: OBD2 dash cam power cable has a built-in MCU intelligent control chip, which can detect the battery power of the in real time. When the power drops to the low-voltage(11.6V) protection value of the OBD cable, the OBD line automatically enters the low-voltage protection and turns off the output!
✪ Straight Mini USB Plug: Particularly suitable when the camera port is positioned on the upper side, hide the OBD cable along the roof without obstructing your view anymore.
✪ Plug and play, easy to install: Plug and play, do not destroy the original circuit. It simply plugs into your OBD plug and draws power for your device. Also doesnt interfere with any vehicle diagnostics. Cable is long enough to reach front or rear of the

Product Description

GELRHONR OBD2 OBD Power Cable for Dash Camera ,OBD2 Diagnostic Extension Adapter to Mini USB Cable 24 Hours Surveillance/Acc Mode with Switch Button, fits for most dash cameras, GPS, radar, and dash cams. Don't worry, if you forgetting to start/stop your dash cam, now it takes of itself. Power cable for dash cam was installed completely hidden. It simply plugs into your OBD plug and draws power for your device. Also doesnt interfere with any vehicle diagnostics. Note: This cable does not work with Electric Vehicle Only for Charging OBD Power Connector: Obtaining power from OBD interface only, no interference in other OBD data communication. OBD Power Cable for Dash Cam Mini USB Have Two Work Modes: ① MODE“—”: will active your Dash Cam parking mode for 24h Surveillance and power will cut off if voltage drops below 11.6V; Input:DC11.6V-36V Output:DC5V/3A ② Mode“O”: The obd power cable type c will power off after 5 minutes when your ACC is off. Input:DC12.8V-36V Output:DC5V/3A Straight Mini USB Plug: Perfect for the camera port is on the upper sides, and not block your view a little more. Length: 3.5M/11.5Ft The cable is long enough to be routed across under the dash, up the A pillar and to the center of the window. Packing list: 1 * OBD to Mini USB OBDII Adapter Hardwire Charger Cable